Tender Notice
A8 Workshop Automation Supplementary Pneumatic Control Valve Bidding Announcement
DIGA PHARMACEUTICAL GROUP SHARESLimited Company
A8 Workshop Automation Supplementary Pneumatic Control Valve Bidding Announcement
Basic information of 1. project
1. Project (Material) Name: A8 Workshop Automation Supplementary Pneumatic Control Valve
2. Location of demand: 268 Tianrun Road, Wendeng Economic and Technological Development Zone, Weihai
3. Demand overview: see attached table for details
4. Quality requirements: Comply with national mandatory standards and requirements of Party A
5. Time limit requirement: 30 days
6. Other requirements: quotation includes invoice
2. Supplier Qualification Requirements
1. A valid business license shall be provided for a legal person or other organization registered in the People's Republic of China.
2, must have the ability to independently bear civil liability.
3, must have a good business reputation and sound financial accounting system, and can issue special VAT invoices.
4. It must have a good record of paying taxes and social security funds in accordance with the law within 3 years, and there is no record of major violations in business activities.
5, must have the necessary equipment and professional and technical capabilities to perform the project. Relevant supporting materials (including but not limited to professional qualifications, past successful cases and contracts) shall be provided.
6. Other conditions stipulated by laws and regulations.
3. Registration Instructions
1. This tender invitation announcement shall end on [July] [31] of [2024] and will not be accepted within the time limit.
2. If you are interested in participating, please sort out the above information (seal) before the deadline for announcement,Send to dijiazbb@163.com in the form of mail；
Note: Please unify the mailNamed after "preliminary quotation of project name bidding unit name", please leave "contact person, position and contact information of the unit" (not less than two) in the body of the email.
3. Telephone number for consultation: [Li Wei 15106314392]]
4. After examination of qualified registration units, our staff will send detailed bidding documents by mail. Please check the mailbox in time. If you receive any, please reply and confirm by mail.
4. supervision and reporting methods
1. Reporting telephone number: 0631-3855888
2. Reporting Mailbox: zhengquanbu@dijiagroup.com
5. Other
The final interpretation of this tender belongs to our company. Please pay attention to the feedback information received by phone or email.
A8 Workshop Automation Supplementary Pneumatic Control Valve Bidding Announcement
Basic information of 1. project
1. Project (Material) Name: A8 Workshop Automation Supplementary Pneumatic Control Valve
2. Location of demand: 268 Tianrun Road, Wendeng Economic and Technological Development Zone, Weihai
3. Demand overview: see attached table for details
4. Quality requirements: Comply with national mandatory standards and requirements of Party A
5. Time limit requirement: 30 days
6. Other requirements: quotation includes invoice
2. Supplier Qualification Requirements
1. A valid business license shall be provided for a legal person or other organization registered in the People's Republic of China.
2, must have the ability to independently bear civil liability.
3, must have a good business reputation and sound financial accounting system, and can issue special VAT invoices.
4. It must have a good record of paying taxes and social security funds in accordance with the law within 3 years, and there is no record of major violations in business activities.
5, must have the necessary equipment and professional and technical capabilities to perform the project. Relevant supporting materials (including but not limited to professional qualifications, past successful cases and contracts) shall be provided.
6. Other conditions stipulated by laws and regulations.
3. Registration Instructions
1. This tender invitation announcement shall end on [July] [31] of [2024] and will not be accepted within the time limit.
2. If you are interested in participating, please sort out the above information (seal) before the deadline for announcement,Send to dijiazbb@163.com in the form of mail；
Note: Please unify the mailNamed after "preliminary quotation of project name bidding unit name", please leave "contact person, position and contact information of the unit" (not less than two) in the body of the email.
3. Telephone number for consultation: [Li Wei 15106314392]]
4. After examination of qualified registration units, our staff will send detailed bidding documents by mail. Please check the mailbox in time. If you receive any, please reply and confirm by mail.
4. supervision and reporting methods
1. Reporting telephone number: 0631-3855888
2. Reporting Mailbox: zhengquanbu@dijiagroup.com
5. Other
The final interpretation of this tender belongs to our company. Please pay attention to the feedback information received by phone or email.
| Serial Number | Position number | Operating conditions | Valve Specifications | implementing agency | Locator | ||||||||||||||||||||||||||||||||||||
| Process medium | Operating temperature ℃ |
Pressure before valve MPa (G) | Pressure after valve MPa (G) | Standard density kg/m3 | Max. flow kg/h | Normal flow kg/h | Minimum flow kg/h | Valve position at air fault | Type | Number of seats | Spool type | Heat Sink/Extension Bar | Nominal diameter DN mm |
flow characteristics | Body material. | Spool material | Packing material | Seat material | Leakage level | Flange standard and grade | Flange size and sealing surface | Flange material | Type | Spring range | Relative travel | Supply pressure | Input signal | Output signal | Air supply pressure | Form of action | Electrical Interface Dimensions | Air signal interface size | Explosion-proof grade | Protection level | Remarks | Workshop | Name | Model | ANNEX DESCRIPTION | ||
| 1 | 03-TV-31105 | Steam | 152 | 0.5 | 0.45 | 2.64 | 119.89 | 67.44 | 29.97 | FC | Single-seat regulating valve | 1 | single-seat ball valve | Ordinary type | φ45x3.5 | Equal percentage | WCB | S30408 ST | Graphite | S30408 ST | ANSI IV | HG/T 20592 | 40-16 RF | WCB | Multi-spring film | 80~240kPa | Manufacturer's Standard | 0.4MPa | 4~20mADC | 80~240kPa | 0.4MPa | 正作用 | 1/2"NPT(F) | Rc1/4"(∅8) | Ex d II BT4 Gb | IP65 | 带过滤器/表不锈钢位号牌 | A8 | Single-seat regulating valve | A101-P1-A1/40/16/P/ST/A | 机械式定位器：APV200（和利时，不带反馈）；减压阀：YT-200(国产，带气源接头) |
| 2 | 03-TV-33205 | Steam | 152 | 0.5 | 0.45 | 2.64 | 119.89 | 67.44 | 29.97 | FC | Single-seat regulating valve | 1 | single-seat ball valve | Ordinary type | φ45x3.5 | Equal percentage | WCB | S30408 ST | Graphite | S30408 ST | ANSI IV | HG/T 20592 | 40-16 RF | WCB | Multi-spring film | 80~240kPa | Manufacturer's Standard | 0.4MPa | 4~20mADC | 80~240kPa | 0.4MPa | 正作用 | 1/2"NPT(F) | Rc1/4"(∅8) | Ex d II BT4 Gb | IP65 | 带过滤器/表不锈钢位号牌 | A8 | Single-seat regulating valve | A101-P1-A1/40/16/P/ST/A | 机械式定位器：APV200（和利时，不带反馈）；减压阀：YT-200(国产，带气源接头) |