Tender Notice
Pneumatic on-off valve for second-stage standby tank in tank farm
DIGA PHARMACEUTICAL GROUP SHARESLimited Company
Tender Notice for Pneumatic Switch Valves for Spare Tanks in Phase II of Tank Farm
Basic information of 1. project
1. Project (Material) Name: 4 pneumatic on-off valves for standby tanks in Phase II of tank farm
2. Location of demand: 268 Tianrun Road, Wendeng Economic and Technological Development Zone, Weihai
3. Demand overview: see attached table for details
4. Quality requirements: Comply with national mandatory standards and requirements of Party A
5. Time limit requirement: 30 days
6. Other requirements: quotation includes invoice
2. Supplier Qualification Requirements
1. A valid business license shall be provided for a legal person or other organization registered in the People's Republic of China.
2, must have the ability to independently bear civil liability.
3, must have a good business reputation and sound financial accounting system, and can issue special VAT invoices.
4. It must have a good record of paying taxes and social security funds in accordance with the law within 3 years, and there is no record of major violations in business activities.
5, must have the necessary equipment and professional and technical capabilities to perform the project. Relevant supporting materials (including but not limited to professional qualifications, past successful cases and contracts) shall be provided.
6. Other conditions stipulated by laws and regulations.
3. Registration Instructions
1. This tender invitation announcement shall end on [July] [31] of [2024] and will not be accepted within the time limit.
2. If you are interested in participating, please sort out the above information (seal) before the deadline for announcement,Send to dijiazbb@163.com in the form of mail；
Note: Please unify the mailNamed after "preliminary quotation of project name bidding unit name", please leave "contact person, position and contact information of the unit" (not less than two) in the body of the email.
3. Telephone number for consultation: [Li Wei 15106314392]]
4. After examination of qualified registration units, our staff will send detailed bidding documents by mail. Please check the mailbox in time. If you receive any, please reply and confirm by mail.
4. supervision and reporting methods
1. Reporting telephone number: 0631-3855888
2. Reporting Mailbox: zhengquanbu@dijiagroup.com
5. Other
The final interpretation of this tender belongs to our company. Please pay attention to the feedback information received by phone or email.
Tender Notice for Pneumatic Switch Valves for Spare Tanks in Phase II of Tank Farm
Basic information of 1. project
1. Project (Material) Name: 4 pneumatic on-off valves for standby tanks in Phase II of tank farm
2. Location of demand: 268 Tianrun Road, Wendeng Economic and Technological Development Zone, Weihai
3. Demand overview: see attached table for details
4. Quality requirements: Comply with national mandatory standards and requirements of Party A
5. Time limit requirement: 30 days
6. Other requirements: quotation includes invoice
2. Supplier Qualification Requirements
1. A valid business license shall be provided for a legal person or other organization registered in the People's Republic of China.
2, must have the ability to independently bear civil liability.
3, must have a good business reputation and sound financial accounting system, and can issue special VAT invoices.
4. It must have a good record of paying taxes and social security funds in accordance with the law within 3 years, and there is no record of major violations in business activities.
5, must have the necessary equipment and professional and technical capabilities to perform the project. Relevant supporting materials (including but not limited to professional qualifications, past successful cases and contracts) shall be provided.
6. Other conditions stipulated by laws and regulations.
3. Registration Instructions
1. This tender invitation announcement shall end on [July] [31] of [2024] and will not be accepted within the time limit.
2. If you are interested in participating, please sort out the above information (seal) before the deadline for announcement,Send to dijiazbb@163.com in the form of mail；
Note: Please unify the mailNamed after "preliminary quotation of project name bidding unit name", please leave "contact person, position and contact information of the unit" (not less than two) in the body of the email.
3. Telephone number for consultation: [Li Wei 15106314392]]
4. After examination of qualified registration units, our staff will send detailed bidding documents by mail. Please check the mailbox in time. If you receive any, please reply and confirm by mail.
4. supervision and reporting methods
1. Reporting telephone number: 0631-3855888
2. Reporting Mailbox: zhengquanbu@dijiagroup.com
5. Other
The final interpretation of this tender belongs to our company. Please pay attention to the feedback information received by phone or email.
| Serial Number | Position number | Use | Material | Operating conditions | Valve Specifications | Form of implementing agency | ||||||||||||||||||||||||||||
| Process medium | Operating temperature. ℃ |
Operating pressure MPa(G) | Maximum differential pressure. MPa | Type | Valve type | Actuator | SMC Filter AW20-02BG-A-DNW9935 | Parker solenoid valve BNKAD6JMCD2-LADNC2(1/2NPT,EXDIICT6,24V) | Stark switch APL-410N(ExdbIIBT6, Omron switch) | Remarks | Nominal diameter mm |
Valve body material | Valve trim material | Packing material | Seal form | Leakage level | Valve position in case of air supply failure | Flange standard and grade. | Flange size and sealing surface |
Form of implementing agency | Input signal | Relative travel | Air supply pressure | Gas nozzle size | Solenoid valve | return switch | Explosion-proof grade | Protection level | Filter Assembly | Quantity | ||||
| 1 | XV-V12141 | Standby tank unloading pump front shut-off valve | S30408 | Material/L | Normal temperature | 0.04 | 0.1 | Pneumatic O-type ball valve | DJQ641F-16P/RL-DN80-SRK | AT125S-SRK | Inclusive | Inclusive | Inclusive | Spool material 316L | DN80 | CF8 | 3016 | V-PTFE | soft seal | VI | FC | HG20592-2009,PN16 | DN80 RF | 气动活塞式单作用 | ON/OFF | 90°/<3s | 0.4MPa | Rc1/4(带∅8卡套接头) | 隔爆低功耗常励磁 两位三通 24VDC 1/2"NPT(F) | 机械式SPDTx2 3/4"NPT(F) | ExdIIBT4 Gb | IP65 | 带 | 1 |
| 2 | XV-V12142 | V1214进料切断阀 | S30408 | Material/L | Normal temperature | 0.3 | 0.3 | Pneumatic O-type ball valve | DJQ641F-16P/RL-DN65-SRK | AT125S-SRK | Inclusive | Inclusive | Inclusive | Spool material 316L | DN65 | CF8 | 3016 | V-PTFE | soft seal | VI | FC | HG20592-2009,PN16 | DN65 RF | 气动活塞式单作用 | ON/OFF | 90°/<3s | 0.4MPa | Rc1/4(带∅8卡套接头) | 隔爆低功耗常励磁 两位三通 24VDC 1/2"NPT(F) | 机械式SPDTx2 3/4"NPT(F) | ExdIIBT4 Gb | IP65 | 带 | 1 |
| 3 | XV-V12143 | V1214出料切断阀 | S30408 | Material/L | Normal temperature | 0.3 | 0.3 | Pneumatic O-type ball valve | DJQ641F-16P/RL-DN65-SRK | AT125S-SRK | Inclusive | Inclusive | Inclusive | Spool material 316L | DN65 | CF8 | 3016 | V-PTFE | soft seal | VI | FC | HG20592-2009,PN16 | DN65 RF | 气动活塞式单作用 | ON/OFF | 90°/<3s | 0.4MPa | Rc1/4(带∅8卡套接头) | 隔爆低功耗常励磁 两位三通 24VDC 1/2"NPT(F) | 机械式SPDTx2 3/4"NPT(F) | ExdIIBT4 Gb | IP65 | 带 | 1 |
| 4 | XV-V12144 | 备用罐与槽车之间气相管线切断阀 | S30408 | Material/L | Normal temperature | 500pa | 0.1 | Pneumatic O-type ball valve | DJQ641F-16P/RL-DN50-SRK | AT105S-SRK | Inclusive | Inclusive | Inclusive | Spool material 316L | DN50 | CF8 | 3016 | V-PTFE | soft seal | VI | FC | HG20592-2009,PN16 | DN50 RF | 气动活塞式单作用 | ON/OFF | 90°/<3s | 0.4MPa | Rc1/4(带∅8卡套接头) | 隔爆低功耗常励磁 两位三通 24VDC 1/2"NPT(F) | 机械式SPDTx2 3/4"NPT(F) | ExdIIBT4 Gb | IP65 | 带 | 1 |
| 4 | ||||||||||||||||||||||||||||||||||