Tender Notice
A4, S106D workshop to add steel lined PE storage tank
DIGA PHARMACEUTICAL GROUP SHARESLimited Company
A4, S106D workshop to add steel lining PE storage tank tender notice
Basic information of 1. project
1. Project (Material) Name: Add steel lined PE storage tank in workshop A4 and S106D
2. Location of demand: 268 Tianrun Road, Wendeng Economic and Technological Development Zone, Weihai
3. Demand overview: 500L 2; 10m ³ 1 set
Steel lined PE storage tank, the medium size in the table below is the effective use volume, the use coefficient is 0.9, the use temperature is -10-40 ℃, the use pressure is 2000Pa, the use solvent is hydrochloric acid, acetone, waste water, the lining is 18mmPE, the outside is 2 times of epoxy resin primer and 1 time of gray topcoat. The common vertical storage tank adopts an upper conical head, a lower flat cover, the upper head is welded with the cylinder, and the flat bottom is reinforced with a support structure. Standard maintenance guardrail is set on the top of the tank, and maintenance ladder (with guardrail) is set on the side wall. The specific nozzle shall be subject to the confirmation of the drawing. All flanges are GB20592 standard RF flanges. The electric spark side shall be carried out according to the standard when leaving the factory, and the certificate, electric spark detection report, instructions and relevant drawings shall be provided.
4. Quality requirements: Comply with national mandatory standards and requirements of Party A
5. Time limit requirement: 30 days
6. Other requirements: quotation includes tax invoice and freight
2. Supplier Qualification Requirements
1. A valid business license shall be provided for a legal person or other organization registered in the People's Republic of China.
2, must have the ability to independently bear civil liability.
3, must have a good business reputation and sound financial accounting system, and can issue special VAT invoices.
4. It must have a good record of paying taxes and social security funds in accordance with the law within 3 years, and there is no record of major violations in business activities.
5, must have the necessary equipment and professional and technical capabilities to perform the project. Relevant supporting materials (including but not limited to professional qualifications, past successful cases and contracts) shall be provided.
6. Other conditions stipulated by laws and regulations.
3. Registration Instructions
1. This tender invitation announcement shall end on [August] [30] of [2024] and will not be accepted within the time limit.
2. If you are interested in participating, please sort out the above information (seal) before the deadline for announcement,Send to dijiazbb@163.com in the form of mail；
Note: Please unify the mailNamed after "preliminary quotation of project name bidding unit name", please leave "contact person, position and contact information of the unit" (not less than two) in the body of the email.
3. Telephone number for consultation: [Li Wei 15106314392]]
4. After examination of qualified registration units, our staff will send detailed bidding documents by mail. Please check the mailbox in time. If you receive any, please reply and confirm by mail.
4. supervision and reporting methods
1. Reporting telephone number: 0631-3855888
2. Reporting Mailbox: zhengquanbu@dijiagroup.com
5. Other
The final interpretation of this tender belongs to our company. Please pay attention to the feedback information received by phone or email.
A4, S106D workshop to add steel lining PE storage tank tender notice
Basic information of 1. project
1. Project (Material) Name: Add steel lined PE storage tank in workshop A4 and S106D
2. Location of demand: 268 Tianrun Road, Wendeng Economic and Technological Development Zone, Weihai
3. Demand overview: 500L 2; 10m ³ 1 set
Steel lined PE storage tank, the medium size in the table below is the effective use volume, the use coefficient is 0.9, the use temperature is -10-40 ℃, the use pressure is 2000Pa, the use solvent is hydrochloric acid, acetone, waste water, the lining is 18mmPE, the outside is 2 times of epoxy resin primer and 1 time of gray topcoat. The common vertical storage tank adopts an upper conical head, a lower flat cover, the upper head is welded with the cylinder, and the flat bottom is reinforced with a support structure. Standard maintenance guardrail is set on the top of the tank, and maintenance ladder (with guardrail) is set on the side wall. The specific nozzle shall be subject to the confirmation of the drawing. All flanges are GB20592 standard RF flanges. The electric spark side shall be carried out according to the standard when leaving the factory, and the certificate, electric spark detection report, instructions and relevant drawings shall be provided.
4. Quality requirements: Comply with national mandatory standards and requirements of Party A
5. Time limit requirement: 30 days
6. Other requirements: quotation includes tax invoice and freight
2. Supplier Qualification Requirements
1. A valid business license shall be provided for a legal person or other organization registered in the People's Republic of China.
2, must have the ability to independently bear civil liability.
3, must have a good business reputation and sound financial accounting system, and can issue special VAT invoices.
4. It must have a good record of paying taxes and social security funds in accordance with the law within 3 years, and there is no record of major violations in business activities.
5, must have the necessary equipment and professional and technical capabilities to perform the project. Relevant supporting materials (including but not limited to professional qualifications, past successful cases and contracts) shall be provided.
6. Other conditions stipulated by laws and regulations.
3. Registration Instructions
1. This tender invitation announcement shall end on [August] [30] of [2024] and will not be accepted within the time limit.
2. If you are interested in participating, please sort out the above information (seal) before the deadline for announcement,Send to dijiazbb@163.com in the form of mail；
Note: Please unify the mailNamed after "preliminary quotation of project name bidding unit name", please leave "contact person, position and contact information of the unit" (not less than two) in the body of the email.
3. Telephone number for consultation: [Li Wei 15106314392]]
4. After examination of qualified registration units, our staff will send detailed bidding documents by mail. Please check the mailbox in time. If you receive any, please reply and confirm by mail.
4. supervision and reporting methods
1. Reporting telephone number: 0631-3855888
2. Reporting Mailbox: zhengquanbu@dijiagroup.com
5. Other
The final interpretation of this tender belongs to our company. Please pay attention to the feedback information received by phone or email.