DIGA PHARMACEUTICAL GROUP SHARESLimited Company
C8E13 Tender Notice for Compressed Air, Nitrogen and Material Pipeline Filters in Clean Workshop
Basic information of 1. project
1. Project (Material) Name: 19 sets of compressed air, nitrogen and material pipeline filters in C8E13 clean workshop
2. Location of demand: 268 Tianrun Road, Wendeng Economic and Technological Development Zone, Weihai
3. Demand Overview: See Annex for details
4. Quality requirements: Comply with national mandatory standards and requirements of Party A
5. Time limit requirement: 30 days
6. Other requirements: The quotation includes 13% VAT special invoice, including transportation and unloading fees.
2. Supplier Qualification Requirements
1. A valid business license shall be provided for a legal person or other organization registered in the People's Republic of China.
2, must have the ability to independently bear civil liability.
3, must have a good business reputation and sound financial accounting system, and can issue special VAT invoices.
4. It must have a good record of paying taxes and social security funds in accordance with the law within 3 years, and there is no record of major violations in business activities.
5, must have the necessary equipment and professional and technical capabilities to perform the project. Relevant supporting materials (including but not limited to professional qualifications, past successful cases and contracts) shall be provided.
6. Other conditions stipulated by laws and regulations.
3. Registration Instructions
1. This tender invitation announcement shall end on [05] and [08] of [2024] and will not be accepted within the time limit.
2. If you are interested in participating, please sort out the above information (seal) before the deadline for announcement,Send to dishazbb@163.com in the form of mail；
Note: Please unify the mailNamed after "preliminary quotation of project name bidding unit name", please leave "contact person, position and contact information of the unit" (not less than two) in the body of the email.
3. Telephone number for consultation: [Li Wei 15106314392]]
4. After examination of qualified registration units, our staff will send detailed bidding documents by mail. Please check the mailbox in time. If you receive any, please reply and confirm by mail.
4. supervision and reporting methods
1. Reporting telephone number: 0631-3855888
2. Reporting Mailbox: zhengquanbu@dijiagroup.com
5. Other
The final interpretation of this tender belongs to our company. Please pay attention to the feedback information received by phone or email.

Equipment Name	Position number	Model	Requirements	Quantity	Main contact materials	Number of solid residues	Whether a pump is required
Pipe filter	C8	5μm	T-type pipe filter, equipped with 1 20-inch 5um PP folding filter element, 226 interface, internal mirror and external mirror or matte, equipped with stainless steel diaphragm pressure gauge (316L material, factory certificate provided), 1 exhaust valve, 1 drain valve, 38 sanitary quick connection of inlet and outlet pipe openings, and relevant dimensions shall be determined by drawings.	6	Anhydrous methanol, methanol, anhydrous ethanol, ethyl acetate, isopropanol
Pipe filter	C8/E13	0.22μm	Cross-type pipeline filter, equipped with 1 10-inch 0.22um PTFE filter element, 226 interface, internal mirror and external mirror or matte, equipped with stainless steel diaphragm pressure gauge (304 material, factory certificate provided), 1 exhaust valve, 1 drain valve, 51 sanitary quick connection at inlet and outlet nozzle, and relevant dimensions shall be determined by drawings.	10	Compressed air/nitrogen
Pipe filter	E13	0.22μm	Cross-type pipeline filter is equipped with 1 10-inch 0.22um PTFE filter element, 226 interface, internal mirror and external mirror or matte, stainless steel diaphragm pressure gauge (304 material, factory certificate provided), 1 exhaust valve, 1 drain valve, DN50 flange connection at inlet and outlet nozzles, and relevant dimensions shall be determined by drawings.	2	Compressed air/nitrogen
candle filter	S206A-B01	1.5㎡	Bagging candle type self-unloading carbon filter with a filtering area of 1.5 ㎡ and an accuracy of 10um. The diameter of the cylinder is Φ 600*800*4mm, the upper part is supported by cantilever, the lifting ring nut is locked, the lower part enters and the upper part enters and out, and the inlet is DN50. The upper liquid collecting pipe is equipped with back blowing port, total liquid outlet, backwashing port and sampling port. The cylinder is equipped with overflow port DN25 and pressure gauge port DN25. The upper part is equipped with 7-core Φ 80-bag plum-shaped filter tube (with back blowing and gas filter tube (with back and gas shock function); the bottom cover is equipped with DN300 hard seal pneumatic butterfly valve, other seals are made of PTFE material, and the filtering materials are dichloromethane and sodium sulfate. The equipment is required to be fully welded inside and outside, with polishing accuracy ≤ 0.6 and pressure resistance 0.3mpa. All material contact parts are made of 304 stainless steel, and other materials are preferably made of 304 stainless steel (carbon steel parts need to be marked with drawings and indicated in advance when quoting). All pipe orifices are HG20592-2009 with PN1.6 flanges, and 2 sets of PTFE filter elements, pressure gauges and drawings confirm the final equipment size.	1	Intermediate 3, dichloro Alkane, anhydrous sodium sulfate	The dry weight of anhydrous sodium sulfate is about 200KG, and the wet weight is about 300Kg	No